Dry mix mortar sorts of normal mortar (ordinary bonding mortar, concrete
block special thin bed mortar, heat preservation of the
bonding mortar) and special mortar (binding mortar: such
as ceramic tile adhesive, adhesives, thermal insulation
composite system special bonding mortar etc; plastering
mortar: such as the external walls of external thermal
insulation, be bored with child, render color adornment
mortar, heat insulation mortar, etc.; the bonding
mortar) two categories, the factory output in bulk and
bag two methods. Use ready-mixed mortar, cancel the
mixing the construction industry on site is the new
rules.
The company, designs and manufacturse different dry mortar production
lines, the production from 2-50 tons /hour.
Ordinary dry mortar production line generally applies the steel
structure, the typical way is to put the raw materials
(sand, cement, fly ash, and admixture, pigment, polymer,
short fibers) through the pneumatic conveying pot and
measured respectively, and after automatic mixing, the
mixture of material is the finished product. The
finished product will be packed by packaging scale or
transported to the user by truck. Due to the large
demand of the product, the production lines are
required, and the sand are needed in large amount, so
the requirements of the equipment is also higher. The
equipment configuration requires baked sand device.
Special dry mortar can be produced by the above line, as the yield is not
high, the equipment capacity can be adjusted
accordingly, considering the height, also can use the
method of piecewise ascension, this helps to control the
construction cost, and convenient maintenance.
The company has designed various production lines, in the nearly past
five years we have made more than 150 sets of production
lines in the dry mortar industry. At present, the
foreign enterprise, such as Germany BASF company in
China's large factory and domestic famous brand
enterprises purchased the equipment from Conly.
The company's dry mortar production line has high steel type, layered
steel type, the pneumatic conveying type, block type,
and simple type, are highly approved by different users.
The principle of High-rise steel type principle is production line for
normal mortar, and its advantage that raw material is
transported by the pneumatic conveying system directly
into the large bunker, the equipment as follows from up
to down, silo-automatic batch-mixing-finished product
storage-packing, and the production is automatically
operated, the process is controlled by computer,
ingredients accurate, so many Chinese and foreign large
enterprise use this kind of production line.
Layered steel type production line reduces the height of the silos. Many
users consider the investment cost, and the production
efficiency, the hierarchical structure of the production
line is choosed, currently 5~ 20 tons/hour production
line, the production of batching scale on the ground
floor of the factory is, ingredients, the raw material
of silo by screw conveyor to batching scale measurement,
complete measurement through ascension to the blender
mixing machine, stir in storehouse again by complete
finished product packing machine factory packaging. This
structure low investment, without personnel on the
platform operation, the domestic use more, but this kind
of structure requires raw material.Layered steel type
production line reduces the height of the silos. Many
users consider the investment cost, and the production
efficiency, the hierarchical structure of the production
line is choosed, currently 5~ 20 tons/hour production
line, the production of batching scale on the ground
floor of the factory is, ingredients, the raw material
of silo by screw conveyor to batching scale measurement,
complete measurement through ascension to the blender
mixing machine, stir in storehouse again by complete
finished product packing machine factory packaging. This
structure low investment, without personnel on the
platform operation, the domestic use more, but this kind
of structure requires raw material.Pneuamtic conveying
production line is the combination of top steel type and
layered steel type combination, reasonablely solves the
contradiction between high-level steel type and
stratification steel type. It consists of a weighing and
pneumatic conceying pot, kinds of raw materials are
transported to the cushion hopper by the compressed air,
under the cushion hopper there are mixer, finished
product silo, and packaging machine. Pipes are applied
in the transportation system, and screw conveyor and
elevator machine are not needed. In the circumstance of
low height of the workshop, saving the investment and
convenient to operate. Now many foreign companies and
domestic enterprises are using the system manufactured
by Conly.Under the condition of the specific factory,
many users choose the simple type dry mortar production
line, only use elevator machine, mixer, finished product
silo, and packaging machine for the production. Some
Users also have adopted the automatic control block dry
mortar production line, wet ingredients production line
manufactured by Conly.
|